WLS Headliners Bow Style Headliner Installation - 56 Belair Back To Main This is a 56 Belair with a bow style headliner -- these pics are to show the process for installing a headliner in the older style antique and classic cars. This headliner has 8 panels in it. We manufacture and sell the bowstyle headliner for all cars. We sell them by panel - the cost is $11.75 a panel. We have devised a method for making car specific bowstyle headliners, if you are looking for a bowstyle headliner, go to this page and input your headliner information.

Remove the old headliner; remove the trim, visors, dome light, clothes hanger hooks, etc.		Most bow style headliners are stapled or glued around the edges.
Remove the headliner leaving the metal bows (rods) in the headliner. (so you will know which one went where)		This pic is to show the bows; if you don't have a headliner in your vehicle; just measure from bow to bow to use the order form.
Dome light housing -- make sure that you don't have a short in the dome light wiring; because it will get hot and burn the new headliner if the wires are hanging loose.		Replace the rods in the correct place in the new headliner and reinstall it.
Attach the front and the rear 1st; then the sides; and put the trim back in place.		And you should get a new, perfect headliner.

© WLS Headliners 2007

1956 chevrolet belair headliner installation, 56 chevy belair headliner replacement, chevrolet belair headliner, chevy belair headliner kit, antique car headliner, classic car sewn in headliner